Encore

The Entube-Z generates a ±2V or ±1V scaled down version of its input signal, which can then be processed by most computer based measurement platforms.

Input-Output non-linearity:< 250 ppm； Bandwidth range:50Hz; Output voltage:±1V and ±2V

Accuracy:1%

In Stock

YES

Delivery

40 Days

Warranty

365 months

Datasheet

Select Options

Input Current

- +

Add to inquiry form

Electronical

	0.1A	0.5A	1A	2A	3A	4A	5A
Scaling Factor (1V output voltage)	1:1	5:1	10:1	20:1	30:	40:1	50:1
Overload Current (60Hz sinewave for 10s)	0.5Arms	2.5Arms	5Arms	10Arms	15Arms	20Arms	25Arms
Input impedance at 60Hz	1 Ω	200 mΩ	100 mΩ	50 mΩ	333 mΩ	25 mΩ	20 mΩ
Output impedance	2k Ω

Specification

Accuracy	±0.2% (±0.4%)
Bandwidth (-3dB point)	40MHz
Input-Output non-linearity	< 40 ppm/V
Output voltage	±100mV
Gain temperature drift	±25 ppm/°C
Bandwidth (-3dB point）	BNC (Plug)
Max total phase shift at 60Hz	< 0.05°
Output Offset Voltage	< ±10μV
Output connector	BNC (Plug)

Overview

Encore is part of the family of current to voltage transducers designed to measure isolated and ground currents. The main focus of the Encore family is to ease and accelerate measuring the output current from low voltage current sources as well as isolated current transformers (CT).

Particular attention was paid on providing a solution that minimizes cost and improves overall performance on distributed systems such as substations, building monitoring, power distribution systems, etc. The Encore series covers the ranges of ±0.1A, ±1A, ±2A, ±3A, ±4A and ±5A with customizable bandwidth of up to 40kHz and 0.2% accuracy

Environmental

Operating temperature	– 35 to 70 °C
Storage temperature	– 40 to 80 °C

Hardware description

Encore 5c operates as a current to voltage shunt that generates a ±100mV range signal for it’s nominal input current range. This signal can then be processed by a computer based measurement platform. In conjunction with the EasyConnect family, the Encore is the ideal solution for high channel density applications.

Due to its compact size and shape, the Encore can be easily mounted anywhere between the signal source and the data acquisition system. The versions up to 5A may even be used inline with the cable and not require any mounting at all. All can be secured to fixtures using cable ties.